Ketron ™ CM CA30 PEEK is a 30% carbon fiber reinforced polyether ether ketone molded by compression molding, which has excellent impact resistance, corrosion resistance, chemical resistance, and wear resistance. Due to significantly reduced thermal expansion and superior load-bearing capacity and high thermal conductivity, Ketron ™ CM CA30 PEEK is highly favored for its ability to extend the lifespan of components and provide rapid heat dissipation in bearing applications. Ketron ™ CM CA30 PEEK profiles also perform well in large component applications that require high strength and stiffness.
Performance
- 30% carbon fiber reinforcement
- Excellent impact resistance, chemical corrosion resistance, and wear resistance
- Low thermal expansion
- Very high carrying capacity
- High thermal conductivity
- Rapid heat dissipation in bearing applications
| Performance |
Value |
| Heat Deflection Temperature at 1.8MPa (264 psi) (ºC) |
|
| Continuous allowable service temperature in air |
250 |
| Flammability (UL Rating) |
V-0 |
| Performance |
Value |
| Tensile Strength (MPa) |
|
| Tensile Modulus of Elasticity (MPa) |
|
| Compressive stress at 1% nominal strain (MPa) |
|
| Compressive stress at 2% nominal strain (MPa) |
|
| Compressive stress at 5% nominal strain (MPa) |
|
| Flexural Strength (MPa) |
|
| Charpy Impact Notched (kJ/m²) |
|
| Performance |
Value |
| Hot Water / Steam |
Acceptable |
| Acids, Weak |
Acceptable |
| Acids, Strong (pH 1-3) |
Limited |
| Alkalies, Weak |
Acceptable |
| Alkalies, Strong (pH 11-14) |
Acceptable |
| Hydrocarbons - Aromatic |
Acceptable |
| Hydrocarbons - Aliphatic |
Acceptable |
| Ketones, Esters |
Acceptable |
| Chlorinated Solvents |
Acceptable |
| Alcohols |
Acceptable |
| Inorganic Salt Solutions |
Acceptable |
| Performance |
Value |
| Dielectric Strength (kV/mm) |
|
Industry Specific Usage (FOOD)
| Performance |
Value |
| FDA |
Not compliant |
| EU |
Not compliant |
| USDA |
Not compliant |
| 3A-SSI |
Not compliant |
| VMX materials |
Not compliant |
Industry Specific Usage (MEDICAL)
| Performance |
Value |
| ISO 10993-5 and USP <87> |
Not compliant |
| ISO 10993-10 Sensitization |
Not compliant |
| ISO 10993-10 (Intracutaneous Reactivity) and USP <88> |
Not compliant |
| ISO 10993-11 and USP <88> |
Not compliant |
| USP <88> (Implant) |
Not compliant |
| ISO-10993-4 |
Not compliant |
| USP <661> |
Not compliant |
| USP Class VI |
Not compliant |
| AFO - Animal Free Origin |
Not compliant |
Industry Specific Usage (RECYCLED)
| Performance |
Value |
| Statera™ portfolio |
Not compliant |
Industry Specific Usage (NUCLEAR)
| Performance |
Value |
| Shielding Portfolio |
Not compliant |
| PMUC certified |
Not compliant |
Industry Specific Usage (SEMICON)
| Performance |
Value |
| ESd materials |
Not compliant |
| Conductive materials |
Not compliant |
| Performance |
Value |
| Base Material |
PEEK |
| Brand Family |
|
| Colors |
黑色 |
| Density (g/cm3) |
|
| Water Absorption after 24 hrs immersion in water (%) |
|
| Water Absorption at saturation in water (%) |
|
| Wear Factor (µm/km) |
|
| Available shapes |
板 管 |
| Main Use Bearing and/or Structural |
Bearing Structural |
